Installing the TWRP recovery on your Sony Xperia Z is not a difficult task, but if you still have questions or doubts, be sure of the fact that I am here to help you all the way.
How to Install TWRP Recovery on Sony Xperia Z:
First of all,
flashing a custom recovery image is an unofficial operation, so after
completing thisTWRP recovery step by step guide you won’t be able to use your
Xperia Z warranty. And if you make any mistake, you risk bricking the device.
On your Sony Xperia
Z phone, you must also go into Settings -> About device and find the
Build Number and tap on it 7 times to enable developer settings. Press back and
go into Developer Options in order to enable USB debugging.
You will need the
proper drivers installed on your computer and no less important, you must also
deactivate the security protection that might interfere with the procedure or
you risk being unsuccessful, just as you have to properly charge the device.
How to Install TWRP Recovery on Sony Xperia Z:
- For
the beginning, my advice is to download the TWRP recovery file on your
computer by using this
direct link;
- Unzip
the TWRP recovery package on desktop;
- Enter
into the folder;
- From
there, you have to open a command prompt window, so press and hold Shift
keyboard key while right clicking on any blank space;
- Turn
off your Sony phone;
- Enter
it into fastboot mode;
- Then,
connect your Xperia device with your PC with the help of the USB cable.
- Now,
in the cmd window type: “fastboot devices” in order to check if your phone
has been recognized by the computer;
- If
there is a problem, reinstall its USB drivers;
- In the
same cmd window you have to type “fastboot flash boot boot.img”;
- Wait
while TWRP recovery will be automatically flashed on your Sony Xperia Z;
- Unplug
the USB cable;
- All
you have to do now is to reboot your smartphone.
COMMENTS